Your fibre. Your ONT. Your visibility.
The PON Stick replaces the operator's sealed box with an SFP-form ONT that plugs straight into your own router — so you can see the light levels, read the alarms, and prove where the fault actually is.
Anime4000 GPON Stick
CureComp Technology is the official supplier and reseller of the Anime4000 GPON Stick and the NIJIKA Firmware SDK.
- Genuine units
- Sourced through the official channel, not a grey-market clone.
- NIJIKA Firmware SDK
- Supported firmware with a real development path behind it.
- Configured for your ISP
- We help you get it registered and online on your line.
- Backed by engineers
- The same team runs PON professionally every day.
CureComp is a member of the Open PON Foundation
The Open PON Foundation exists to keep fibre access open, interoperable and accountable to the people paying for it. As a member, CureComp backs that with product: genuine third-party ONTs, supported firmware, and honest advice about what your operator does and doesn't allow.
It also means the PON Stick isn't a one-off gadget. It sits inside a wider effort to make user-owned optical network terminals normal, documented and supportable — rather than a workaround you're left to figure out alone.
- Open standards
- Over sealed, operator-locked equipment.
- Interoperability
- Across ONTs, routers and operators.
- Transparency
- Your link, your telemetry, your evidence.
- Shared knowledge
- So deployments are repeatable, not tribal.
Aligned with a wider movement
The Open PON Foundation shares its vision with the organisations that already proved this model works in adjacent parts of the stack.
Named to describe the shared vision. CureComp's membership is of the Open PON Foundation; no endorsement by ONF, EFF or the Linux Foundation is implied.
Stop being the last to know
With an operator-managed ONT, the link is a black box: it either works or you file a ticket and wait. The PON Stick puts the instrumentation on your side of the fibre.
Manage and monitor it yourself
Optical power, temperature, PON state, uptime and alarms — read from your own side and exportable to Prometheus and Grafana, so your SLA numbers are numbers you can actually check.
Peace of mind, not blind trust
No more unattended equipment quietly managed by someone else. You know the state of your own link at any moment, without asking permission.
Recovery in minutes
Swap in a spare stick, re-plug the fibre and you're back. No waiting for a truck roll just to replace a failed box on your wall.
Faster, more stable, lower latency
One less device, one less hop, one less NAT layer between your router and the fibre — a cleaner path with fewer things to go wrong.
Clean division of responsibility
The ISP technician does their part up to the fibre. You simply re-plug it into your router. Troubleshooting stops being an argument.
Less clutter, less power
An SFP-sized module in your router replaces a separate powered box, its adaptor and its patch cable. One device instead of three.
Where the PON Stick sits
It takes the place of the operator's ONT entirely — the fibre terminates inside your own router.
What you gain
- The ONT function moves into hardware you own and control
- Your router's own dashboard reports the fibre status
- Alarms and optical readings feed your existing monitoring
- Spares are yours to hold, so downtime is your decision to shorten
What stays the same
- The fibre, splitter and OLT remain the ISP's responsibility
- Your service plan, speed profile and authentication are unchanged
- ISP technicians still handle any fault on the line side
- You re-plug the fibre back into the router and you're live again
Exports straight into Prometheus and Grafana
The PON Stick doesn't keep its telemetry to itself. Optical levels, PON state and link health can be scraped by Prometheus and rendered in Grafana alongside everything else you already watch — no separate portal, no vendor dashboard you have to remember to check.
That turns a fibre link from something you notice is broken into something you can trend, alert on, and put in front of your ISP with a timestamp attached.
What you can graph and alert on
- Optical Rx / Tx power
- Watch the light budget drift before it drops the link — the earliest warning of a dirty connector, a bend or a failing splice.
- PON state
- Registration and operational state over time, so a flapping link leaves a trace instead of vanishing.
- Module temperature
- Correlate afternoon instability with a hot rack or an unventilated cabinet.
- Uptime & alarms
- Hard evidence for an SLA conversation, with the timestamps to back it.
- Your existing stack
- Same Prometheus, same Grafana, same alert routing you already run for servers and switches.
Works well across the MikroTik range
The PON Stick is proven on a wide spread of MikroTik models with an SFP cage. If you're choosing a router to pair it with, one stands out.
We'll match the model to your line speed, your firewall rules and how much you actually route — and tell you if a cheaper box will do the job.
MikroTik RB5009
The best balance of cost, reliability and throughput we've deployed. It pairs with the PON Stick cleanly and has the headroom to route a gigabit line without becoming the bottleneck.
- Most cost-effective
- Performance per ringgit that nothing else in the range matches for a fibre-terminating router.
- Reliable
- Passively cooled, no moving parts, and stable under sustained load in the field.
- High performance
- Enough CPU to route, firewall and run VPN at gigabit speeds with room to spare.
- SFP+ cage
- Takes the PON Stick directly — the fibre terminates inside the router itself.
- RouterOS
- Full L3 routing, VLANs, firewalling and monitoring exports from the same box.
Supports the major Malaysian ISPs
The PON Stick is designed for the networks people here actually use — and we help you get it registered on your line rather than leaving you to guess.
Provisioning requirements differ between operators and can change. Talk to us with your plan details before ordering and we'll confirm what's needed for your specific service.
| Attribute | Detail |
|---|---|
| Product | Anime4000 GPON Stick |
| Firmware | NIJIKA Firmware SDK |
| Form factor | SFP-form ONT — fits a router's SFP cage |
| Role | Third-party ONT replacing the operator-supplied unit |
| Operators | TM Unifi, Maxis, TIME, PERFECT |
| Management | User-side monitoring of PON state, optical levels and alarms |
| External monitoring | Prometheus scraping with Grafana dashboards and alerting |
| Routers | Wide MikroTik support; MikroTik RB5009 recommended |
| Supply | CureComp Technology — official supplier and reseller |
| White label | Custom label plus Vendor Name, Part Number and Serial Number in the SFP EEPROM |
| Affiliation | Open PON Foundation member |
| Support | Setup guidance and engineering support from our team |
Sell it as your own product
Networking shops, system integrators and ISPs can buy the PON Stick at supplier pricing and ship it under their own name. Not a sticker over ours — your branding on the label and your identity written into the module itself.
Plug one of your units into any switch or router and it identifies itself as your product. Vendor name, part number and serial number are programmed into the SFP EEPROM, so your inventory system, your support desk and your customer all see the same thing.
Firmware updates come from us for the life of the product, so you're reselling something that stays supported rather than a batch you have to maintain alone.
What you get as a reseller
- Supplier pricing
- Trade rates with volume tiers, so there is real margin in reselling rather than a token discount.
- Custom label
- Your brand, your product name and your artwork on the module and its packaging.
- Vendor Name
- Written into the SFP EEPROM, so the module reports your company when a technician queries the port.
- Part Number
- Your own SKU, matching whatever your catalogue and stock system already use.
- Serial Number
- Your numbering scheme, so RMA tracking and warranty lookups stay inside your existing process.
- Firmware updates
- NIJIKA Firmware SDK releases supplied for your units, so your stock does not go stale.
- Engineering backup
- Escalate to our engineers when a customer line does something unusual. Your customer never has to know we exist.
EEPROM programming, minimum order quantities and lead times are agreed per reseller — talk to us with the volumes you have in mind.
Anyone who has waited three days for a replacement box
Businesses on SLA
Independent evidence of link state when uptime is contractual and every minute is billable.
Network engineers
Optical readings and PON status alongside the rest of your monitoring, in the tooling you already run.
Home labs & power users
One router, no ISP box, full control of routing, VLANs and firewalling from the fibre inward.
Integrators & resellers
Deploy a consistent, supportable ONT across client sites — and buy it from an official channel.
PON Stick, answered
Take your fibre link back
Tell us your ISP, your plan and the router you're using. We'll confirm the fit and quote you a genuine unit.